Euro-Pro MB Series Press Brake
Top level press brake meet with a new standard in the market for flexible, intuitive, reliable and high precision sheet metal bending
Increase an CNC crowning system for improved quality
Servo driven back gauge system for increased speeds
3D capable graphical control unit to simulate bending sequences and collision points
Increased working speeds, stroke, daylight, and pressing capacities
Optional integration of advanced safety equipment.
High energy-saving potential
Remarkable noise reduction
Compliance with EU CE Directives
More system safety
Hybrid power system
Main Features
DELEM DA-53T CNC control unit
Max 4-axes control (Y1, Y2, two additional axes )
Y1, Y2 precision ram positioning
Standard BGA-2 for X, R-axis ( X=800mm,R=200mm)
CNC motorized wave crowning
HOERBIGER hydraulic valve block, pump and valves
High Siemens efficiency motor– class IE3
Stand By Function for energy-saving drive
Rear cover: Safety barriers (Category IV)
Sheet metal frontal supports
Front and rear lighting
Offline software Delem Profile-TL
Front cover: AKAS LC-II F safety laser (Category IV) or DSP safety
Optional Features
AUTOMATIC WILA SYSTEM,Hydraulic clamping system for the punches, fixed directly onto the ram.
AUTOMATIC CROWING SYSTEM enables the user to offset deformations of the beam while bending
BENDING SUPPORTS,automatic bending support managed by CNC.
HYBRID SYSTEM
Hoerbiger Hydraulic System From Germany
With ac servo main motor and electro-hydraulic servo pump control system,this machine will not use universal valve control system,which can provide hydraulic oil only when necessary,eliminate throttle and overflow, This reduce the time of hydraulic seals,working in high temperature.
Pressure will be adjusted by CNC system input, working speed will be also adjustable. ALL above things make this machine energy saving, low noise, and less hydraulic problems.

OPTIONAL UPGRATES
COMPENSATION CROWING SYSTEM
This system enables the user to offset deformations of the beam while bending. Thus, the angle is keeping constant along the entire plate length.V-axis is the CNC axis to control the adding convex amount of workbench, it can obtain accurate deflection compensation from the workbench. The adding convex workbench is made up of a group of beveled convex wedge, each wedge slope is designed by the deflection curve of finite element analysis of the slider and workbench vertical plate. CNC controller will calculate the required deflection amount according to the load when the work piece is working (The load will lead to the deflection and deformation), automatically control the relative motion of the convex edge, and finally get an ideal work piece.


LASERSAFE SYSTEM
MazakPower machines optional for Lasersafe comply with the strictest EU regulations with reference to safety. The device installed guarantee thorough safety of the operator without reducing the pace of work.
OPTIONAL
Lasersafe-PCSS A0 004 HS
Lasersafe-PCSS IRIS
AUTOMATIC WILA NEW STANDARD CLAMPING SYSTEMS
WILA’s New-Standard Tooling Systems are the international benchmark for quality and productivity. Tool Holders (Clamping, Crowning and Bottom Tool Holders) make it possible to change tools very quickly.
NEW STANDARD AND AMERICAN STYLE CLAMPING SYSTEMS
Innovative and super-fast clamping systems for clamping punches to the upper beams of press brakes. The Universal Press Brake Concept (UPB) makes it possible install and American Style Clamping Systems on any press brake.
NEW STANDARD CROWNING AND HOLDERS
WILA Crowning systems fully compensate for the deflection in press brakes. This results in a consistent bending angle across the entire length of the machine. WILA New-Standard Crowning Systems utilize a series of patented adjustable wedges known as Wila Waves.


CNC BACKGAUGE UPGRADE
The 6-axis back guage offers you the highest grade of flexibility with highest production speeds. All 6 axis can be positioned independently of each other. Fingers can be independently located three dimension (X,R,Z) in the space. Control unit calculate finger positions on each axis. Stable finger position for asymmetrical work pieces, no setup times for back gauge adjustment.
Anyway,there are Optional BGA-4 for X ,R , Z1, Z2 axis and BGA-5 axes X+R+Z1+Z2+X2,
READ MORE
CNC SHEET FOLLOWERS
This option Automatic bending support managed by CNC provides continuous synchronized support during the bending process that also prevents back bending. This allows for faster and safer part production.
